Excision (E5910) Alu-Power Carbide 2Flute Ball Nose End Mill, Plain Shank

(E5910) Alu-Power Carbide 2-flute Ball Nose End Mill, Plain Shank is an carbide, 2-flute geometry, 50° helix end mill for profiling, contoured surfaces and radius-bottom features. The range keeps the cutter geometry and size information close to each selectable option.

Product details

The E5910 series carbide Alu-Power cutters from YG-1 range from 6-20mm in diameter. These 2 flute ball nose cutters have lapped flutes that are ideal for mirror finish machining on Aluminium and Non-Ferrous materials.

• Suitable for high speed machining of aluminium and other non-ferrous materials.
• Special geometries & lapped flutes ensures the best chip control and surface finish on aluminium.
• Deep flute pockets prevent swarf clogging up the tool.
• Increased tool life and higher cutting accuracy.
• Reduced neck for longer reach.
• Micrograin Carbide Substrate.
• Sharp cutting edges with mirror finish machining.
• Ultra-high metal removal rates possible with WAVE-CUT.

Why choose it

• Specified features include carbide, 2-flute geometry, 50° helix, ball-nose profile.
• Dimensions and geometry are presented together to make tool selection faster.
• Available in 6 options so the required size or configuration can be selected without changing product family.

Choose the right option

Choose by Mill Diameter (mm) and Ball Nose Radius (mm), then confirm the exact part number for the required cutter.

• Mill Diameter (mm): 6.0; Ball Nose Radius (mm): R3.0 — Part E5910060
• Mill Diameter (mm): 8.0; Ball Nose Radius (mm): R4.0 — Part E5910080
• Mill Diameter (mm): 10.0; Ball Nose Radius (mm): R5.0 — Part E5910100
• Mill Diameter (mm): 12.0; Ball Nose Radius (mm): R6.0 — Part E5910120
• Mill Diameter (mm): 16.0; Ball Nose Radius (mm): R8.0 — Part E5910160
• Mill Diameter (mm): 20.0; Ball Nose Radius (mm): R10.0 — Part E5910200