XDP 139

Section 1 - Identification of The Material and Supplier

Trade Name: XDP 139 Spray Oil TCT ALU
Product Use: Industrial metal cutting fluid
Creation Date: June 2017
This version issued: August, 2019 and is valid for 5 years from this date.

Poisons Information Centre: Phone 13 1126 from anywhere in Australia

Section 2 - Hazards Identification

Statement of Hazardous Nature

This product is classified as: Not classified as hazardous according to the criteria of SWA.
Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.

SUSMP Classification: None allocated.
ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.
UN Number: None allocated

GHS Signal word: NONE. Not hazardous. PREVENTION

P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children.
P103: Read label before use.
P260: Do not breathe fumes, mists, vapours or spray.

P262: Do not get in eyes, on skin, or on clothing.

P280: Wear protective gloves, protective clothing and eye or face protection.

RESPONSE

P310: Immediately call a POISON CENTRE or doctor/physician.
P321: Specific treatment (see product label).
P363: Wash contaminated clothing before reuse.
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water. P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

STORAGE

P405: Store locked up.

DISPOSAL

P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS).

Phone: 1800 633 448 (office hours) Fax: 03 5571 1944 sales@excision.com.au

Blend of liquid hydrocarbons and other minor ingredients.

XDP 139 Spray Oil TCT ALU

Industrial metal cutting fluid.

June, 2017
August, 2019 and is valid for 5 years from this date.

Emergency Overview

Physical Description & Colour: Oily liquid.
Odour: Characteristic odour.
Major Health Hazards: no significant risk factors have been found for this product.

Section 3 - Composition/Information on Ingredients

Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)

Issued by: Excision Pty Ltd

Phone: 1800 633 448 (office hours)

Flash point:
Upper Flammability Limit: Lower Flammability Limit: Autoignition temperature: Flammability Class:

Section 6 - Accidental Release Measures

Accidental release: Minor spills do not normally need any special cleanup measures. In the event of a major spill, prevent spillage from entering drains or water courses. As a minimum, wear overalls, goggles and gloves. Suitable materials for protective clothing include rubber, PVC. Eye/face protective equipment should comprise as a minimum, protective glasses and, preferably, goggles. If there is a significant chance that vapours or mists are likely to build up in the cleanup area, we recommend that you use a respirator. Usually, no respirator is necessary when using this product. However, if you have any doubts consult the Australian Standard mentioned below (section 8).

Stop leak if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. If spill is too large or if absorbent material is not available, try to create a dike to stop material spreading or going into drains or waterways. Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage, and dispose of promptly. Can be slippery on floors, especially when wet. Recycle containers wherever possible after careful cleaning. After spills, wash area preventing runoff from entering drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for approved landfill. Ensure legality of disposal by consulting regulations prior to disposal. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.

Section 7 - Handling and Storage

Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. The measures detailed below under "Storage" should be followed during handling in order to minimise risks to

SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

Issued by: Excision Pty Ltd

Phone: 1800 633 448 (office hours)

Physical Description & colour: Odour:
Boiling Point: Freezing/Melting Point: Volatiles:

Vapour Pressure: Vapour Density: Specific Gravity: Water Solubility: pH:

Volatility:
Odour Threshold: Evaporation Rate:
Coeff Oil/water Distribution: Viscosity:
Autoignition temp:

Oily liquid.

Section 10 - Stability and Reactivity

Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties.
Conditions to Avoid: Keep containers tightly closed. Containers should be kept dry.
Incompatibilities: oxidising agents.

Fire Decomposition: Combustion forms carbon dioxide, and if incomplete, carbon monoxide and possibly smoke. Water is also formed. May form nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death.

Polymerisation: This product will not undergo polymerisation reactions. SAFETY DATA SHEET

Issued by: Excision Pty Ltd

Phone: 1800 633 448 (office hours)

Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

•   Eye: A severe eye irritant. Corrosive to eyes: contact can cause corneal burns. Contamination of eyes can result in permanent injury.

•   Contact with skin will result in severe irritation. Corrosive to skin - may cause skin burns.

•   Swallowing can result in nausea, vomiting, diarrhoea, abdominal pain and chemical burns to the

  gastrointestinal tract.

  Classification of Hazardous Ingredients

  Ingredient Risk Phrases
  No ingredient mentioned in the HSIS Database is present in this product at hazardous concentrations.

  Potential Health Effects

  Inhalation:
  Short Term Exposure: Available data indicates that this product is not harmful. In addition product is unlikely to cause any discomfort or irritation.
  Long Term Exposure: No data for health effects associated with long term inhalation.

  Skin Contact:
  Short Term Exposure: Available data indicates that this product is not harmful. It should present no hazards in normal use. Contact with skin will result in severe irritation. Corrosive to skin - may cause skin burns.
  Long Term Exposure: No data for health effects associated with long term skin exposure.

  Eye Contact:
  Short Term Exposure: This material has been classified as not corrosive or irritating to eyes. Long Term Exposure: No data for health effects associated with long term eye exposure.

  Ingestion:
  Short Term Exposure: Significant oral exposure is considered to be unlikely.
  Long Term Exposure: No data for health effects associated with long term ingestion.

  Carcinogen Status:
  SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.

  Section 12 - Ecological Information

  Insufficient data to be sure of status.

  Acute aquatic hazard: This material has been classified as non-hazardous. Acute toxicity estimate (based on ingredients): >100 mg/L
  Long-term aquatic hazard: This material has been classified as non-hazardous. Non-rapidly or rapidly degradable substance for which there are adequate chronic toxicity data available OR in the absence of chronic toxicity data, Acute toxicity estimate (based on ingredients): >100 mg/L, where the substance is not rapidly degradable and/or BCF < 500 and/or log Kow < 4.

  Ecotoxicity: No information available.
  Persistence and degradability: No information available. Bioaccumulative potential: No information available. Mobility: No information available.

  Section 13 - Disposal Considerations

  Disposal: This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to reclaim the product by filtration, distillation or some other means. If neither of these options is suitable in-house, consider controlled incineration, or contact a specialist waste disposal company.

SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)

Issued by: Excision Pty Ltd

Phone: 1800 633 448 (office hours)

Product Name: XDP 139 Page: 5 of 5 This version issued: August, 2019

UN Number: This product is not classified as a Dangerous Good by ADG, IATA or IMDG/IMSBC criteria. No special transport conditions are necessary unless required by other regulations.

Section 12 - Ecological Information