Section 1 - Identification of The Material and Supplier
Blend of liquid hydrocarbons and other minor ingredients.
Trade Name: XDP135
Product Use: Industrial metal working fluid
Creation Date: June, 2017
This version issued: June, 2017 and is valid for 5 years from this date
Poisons Information Centre: Phone 13 1126 from anywhere in Australia
Section 2 - Hazards Identification
Statement of Hazardous Nature
This product is classified as: Not classified as hazardous according to the criteria of SWA.
Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.
SUSMP Classification: None allocated.
ADG Classification: None allocated. Not a Dangerous Good according to Australian Dangerous Goods (ADG) Code, IATA or IMDG/IMSBC criteria.
UN Number: None allocated
GHS Signal word: NONE. Not hazardous. PREVENTION
P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children.
P103: Read label before use.
P260: Do not breathe fumes, mists, vapours or spray.
P262: Do not get in eyes, on skin, or on clothing.
P280: Wear protective gloves, protective clothing and eye or face protection.
RESPONSE
P310: Immediately call a POISON CENTRE or doctor/physician.
P321: Specific treatment (see product label).
P363: Wash contaminated clothing before reuse.
P301+P330+P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303+P361+P353: IF ON SKIN (or hair): Remove immediately all contaminated clothing. Rinse skin with water. P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
STORAGE
P405: Store locked up.
DISPOSAL
P501: If they can not be recycled, dispose of contents to an approved waste disposal plant and containers to landfill (see Section 13 of this SDS).
Emergency Overview
Physical Description & Colour: Oily liquid.
Odour: Characteristic odour.
Major Health Hazards: no significant risk factors have been found for this product.
SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Issued by: Excision Pty Ltd
Phone: 1800 633 448 (office hours)
Section 3 - Composition/Information on Ingredients
Ingredients CAS No Conc,% TWA (mg/m3) STEL (mg/m3)
89347-09-1 <10 112-90-3 <10 112-62-9 0
This is a commercial product whose exact ratio of components may vary slightly. Minor quantities of other non
hazardous ingredients are also possible.
The SWA TWA exposure value is the average airborne concentration of a particular substance when calculated over a normal 8 hour working day for a 5 day working week. The STEL (Short Term Exposure Limit) is an exposure value that may be equalled (but should not be exceeded) for no longer than 15 minutes and should not be repeated more than 4 times per day. There should be at least 60 minutes between successive exposures at the STEL. The term "peak "is used when the TWA limit, because of the rapid action of the substance, should never be exceeded, even briefly.
Section 4 - First Aid Measures
General Information:
You should call The Poisons Information Centre if you feel that you may have been poisoned, burned or irritated by this product. The number is 13 1126 from anywhere in Australia (0800 764 766 in New Zealand) and is available at all times. Have this SDS with you when you call.
Inhalation: First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor.
Skin Contact: Gently blot away excess liquid. Wash gently and thoroughly with water (use non-abrasive soap if necessary) for 5 minutes or until chemical is removed.
Eye Contact: Quickly and gently blot material from eyes. No effects expected. If irritation does occur, flush contaminated eye(s) with lukewarm, gently flowing water for 5 minutes or until the product is removed. Obtain medical advice if irritation becomes painful or lasts more than a few minutes. Take special care if exposed person is wearing contact lenses.
Ingestion: If product is swallowed or gets in mouth, do NOT induce vomiting; wash mouth with water and give some water to drink. If symptoms develop, or if in doubt contact a Poisons Information Centre or a doctor.
Section 5 - Fire Fighting Measures
Fire and Explosion Hazards: The major hazard in fires is usually inhalation of heated and toxic or oxygen deficient (or both), fire gases. There is little risk of an explosion from this product if commercial quantities are involved in a fire. Violent steam generation or eruption may occur upon application of direct water stream on hot liquids. Vapours from this product are heavier than air and may accumulate in sumps, pits and other low-lying spaces, forming potentially explosive mixtures. They may also flash back considerable distances.
Fire decomposition products from this product may be toxic if inhaled. Take appropriate protective measures. Extinguishing Media: In case of fire, use carbon dioxide, dry chemical, foam, water fog.
Fire Fighting: If a significant quantity of this product is involved in a fire, call the fire brigade.
Product Name: XDP 135 Page: 2 of 5 This version issued: June, 2017
Flash point:
Upper Flammability Limit: Lower Flammability Limit: Autoignition temperature: Flammability Class:
>210°C
No data.
No data.
No data.
Not flammable (GHS); C2 combustible (AS 1940)
Section 6 - Accidental Release Measures
Accidental release: Minor spills do not normally need any special cleanup measures. In the event of a major spill, prevent spillage from entering drains or water courses. As a minimum, wear overalls, goggles and gloves. Suitable materials for protective clothing include rubber, PVC. Eye/face protective equipment should comprise as a minimum, protective glasses and, preferably, goggles. If there is a significant chance that vapours or mists are likely to build up in the cleanup area, we recommend that you use a respirator. Usually, no respirator is necessary when using this product. However, if you have any doubts consult the Australian Standard mentioned below (section 8).
Stop leak if safe to do so, and contain spill. Absorb onto sand, vermiculite or other suitable absorbent material. If spill is too large or if absorbent material is not available, try to create a dike to stop material spreading or going into drains or waterways. Sweep up and shovel or collect recoverable product into labelled containers for recycling or salvage, and dispose of promptly. Can be slippery on floors, especially when wet. Recycle containers wherever possible after careful cleaning. After spills, wash area preventing runoff from entering drains. If a significant quantity of material enters drains, advise emergency services. This material may be suitable for approved landfill. Ensure legality of
SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Issued by: Excision Pty Ltd
Phone: 1800 633 448 (office hours)
Alkoxylated long-chain alkanol borate
Amines, C12-14-tert-alkyl
Distillates, petroleum, hydrotreated light paraffinic Phosphoric acid, bis(2-ethylhexyl) ester
alkyl phosphonate
Other non hazardous ingredients
Confidential 68955-53-3 64742-55-8 298-07-7 Confidential secret
Physical Description & colour: Odour:
Boiling Point: Freezing/Melting Point: Volatiles:
Vapour Pressure: Vapour Density: Specific Gravity: Water Solubility: pH:
Oily liquid.
Section 10 - Stability and Reactivity
Reactivity: This product is unlikely to react or decompose under normal storage conditions. However, if you have any doubts, contact the supplier for advice on shelf life properties.
Conditions to Avoid: Keep containers tightly closed. Containers should be kept dry.
SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Issued by: Excision Pty Ltd
Phone: 1800 633 448 (office hours)
Product Name: XDP 135 Page: 3 of 5 This version issued: June, 2017
disposal by consulting regulations prior to disposal. Thoroughly launder protective clothing before storage or re-use. Advise laundry of nature of contamination when sending contaminated clothing to laundry.
Section 7 - Handling and Storage
Handling: Keep exposure to this product to a minimum, and minimise the quantities kept in work areas. Check Section 8 of this SDS for details of personal protective measures, and make sure that those measures are followed. The measures detailed below under "Storage" should be followed during handling in order to minimise risks to persons using the product in the workplace. Also, avoid contact or contamination of product with incompatible materials listed in Section 10.
Storage: Make sure that containers of this product are kept tightly closed. Keep containers dry and away from water. Make sure that the product does not come into contact with substances listed under "Incompatibilities" in Section 10. Check packaging - there may be further storage instructions on the label.
Section 8 - Exposure Controls and Personal Protection
The following Australian Standards will provide general advice regarding safety clothing and equipment:
Respiratory equipment: AS/NZS 1715, Protective Gloves: AS 2161, Occupational Protective Clothing: AS/NZS 4501
set 2008, Industrial Eye Protection: AS1336 and AS/NZS 1337, Occupational Protective Footwear: AS/NZS2210. SWA Exposure Limits TWA (mg/m3) STEL (mg/m3)
Exposure limits have not been established by SWA for this product.
No special equipment is usually needed when occasionally handling small quantities. The following instructions are for bulk handling or where regular exposure in an occupational setting occurs without proper containment systems. Ventilation: This product should only be used in a well ventilated area. If natural ventilation is inadequate, use of a fan is suggested.
Eye Protection: Eye protection such as protective glasses or goggles is recommended when this product is being used.
Skin Protection: You should avoid contact even with mild skin irritants. Therefore you should wear suitable impervious elbow-length gloves and facial protection when handling this product for lengthy periods. See below for suitable material types.
Protective Material Types: We suggest that protective clothing be made from the following materials: rubber, PVC.
Respirator: Usually, no respirator is necessary when using this product. However, if you have any doubts consult the Australian Standard mentioned above.
Safety deluge showers should, if practical, be provided near to where this product is being handled commercially.
Section 9 - Physical and Chemical Properties:
SAFETY DATA SHEET
Poisons Information Centre: 13 1126 from anywhere in Australia, (0800 764 766 in New Zealand)
Issued by: Excision Pty Ltd
Phone: 1800 633 448 (office hours)
Product Name: XDP 135 Page: 4 of 5 This version issued: June, 2017
Incompatibilities: oxidising agents.
Fire Decomposition: Combustion forms carbon dioxide, and if incomplete, carbon monoxide and possibly smoke. Water is also formed. May form nitrogen and its compounds, and under some circumstances, oxides of nitrogen. Occasionally hydrogen cyanide gas in reducing atmospheres. Carbon monoxide poisoning produces headache, weakness, nausea, dizziness, confusion, dimness of vision, disturbance of judgment, and unconsciousness followed by coma and death.
Polymerisation: This product will not undergo polymerisation reactions.
Section 11 - Toxicological Information
Local Effects:
Target Organs: There is no data to hand indicating any particular target organs.
Corrosion/Irritancy:
-
Eye: A severe eye irritant. Corrosive to eyes: contact can cause corneal burns. Contamination of eyes can result in permanent injury.
-
Contact with skin will result in severe irritation. Corrosive to skin - may cause skin burns.
-
Swallowing can result in nausea, vomiting, diarrhoea, abdominal pain and chemical burns to the
gastrointestinal tract.
Classification of Hazardous Ingredients
Ingredient Risk Phrases
No ingredient mentioned in the HSIS Database is present in this product at hazardous concentrations.Potential Health Effects
Inhalation:
Short Term Exposure: Available data indicates that this product is not harmful. In addition product is unlikely to cause any discomfort or irritation.
Long Term Exposure: No data for health effects associated with long term inhalation.Skin Contact:
Short Term Exposure: Available data indicates that this product is not harmful. It should present no hazards in normal use. Contact with skin will result in severe irritation. Corrosive to skin - may cause skin burns.
Long Term Exposure: No data for health effects associated with long term skin exposure.Eye Contact:
Short Term Exposure: This material has been classified as not corrosive or irritating to eyes. Long Term Exposure: No data for health effects associated with long term eye exposure.Ingestion:
Short Term Exposure: Significant oral exposure is considered to be unlikely.
Long Term Exposure: No data for health effects associated with long term ingestion.Carcinogen Status:
SWA: No significant ingredient is classified as carcinogenic by SWA. NTP: No significant ingredient is classified as carcinogenic by NTP. IARC: No significant ingredient is classified as carcinogenic by IARC.Section 12 - Ecological Information
Insufficient data to be sure of status.
Acute aquatic hazard: This material has been classified as non-hazardous. Acute toxicity estimate (based on ingredients): >100 mg/L
Long-term aquatic hazard: This material has been classified as non-hazardous. Non-rapidly or rapidly degradable substance for which there are adequate chronic toxicity data available OR in the absence of chronic toxicity data, Acute toxicity estimate (based on ingredients): >100 mg/L, where the substance is not rapidly degradable and/or BCF < 500 and/or log Kow < 4.Ecotoxicity: No information available.
Persistence and degradability: No information available. Bioaccumulative potential: No information available. Mobility: No information available.
Section 13 - Disposal Considerations
Disposal: This product may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to reclaim the product by filtration, distillation or some other means. If neither of these options is suitable in-house, consider controlled incineration, or contact a specialist waste disposal company.
Section 14 - Transport Information
UN Number: This product is not classified as a Dangerous Good by ADG, IATA or IMDG/IMSBC criteria. No special transport conditions are necessary unless required by other regulations.
Section 15 - Regulatory Information
AICS: This product is compliant with NICNAS regulations.
Section 16 - Other Information
This SDS contains only safety-related information. For other data see product literature. Acronyms:
ADG Code AICS
SWA
CAS number Hazchem Code
IARC
NOS
NTP R-Phrase SUSMP
UN Number
Australian Code for the Transport of Dangerous Goods by Road and Rail (7th edition) Australian Inventory of Chemical Substances
Safe Work Australia, formerly ASCC and NOHSC
Chemical Abstracts Service Registry Number
Emergency action code of numbers and letters that provide information to emergency services especially firefighters
International Agency for Research on Cancer
Not otherwise specified
National Toxicology Program (USA)
Risk Phrase
Standard for the Uniform Scheduling of Medicines & Poisons United Nations Number
THIS SDS SUMMARISES OUR BEST KNOWLEDGE OF THE HEALTH AND SAFETY HAZARD INFORMATION OF THE PRODUCT AND HOW TO SAFELY HANDLE AND USE THE PRODUCT IN THE WORKPLACE. EACH USER MUST REVIEW THIS SDS IN THE CONTEXT OF HOW THE PRODUCT WILL BE HANDLED AND USED IN THE WORKPLACE.
IF CLARIFICATION OR FURTHER INFORMATION IS NEEDED TO ENSURE THAT AN APPROPRIATE RISK ASSESSMENT CAN BE MADE, THE USER SHOULD CONTACT THIS COMPANY SO WE CAN ATTEMPT TO OBTAIN ADDITIONAL INFORMATION FROM OUR SUPPLIERS
OUR RESPONSIBILITY FOR PRODUCTS SOLD IS SUBJECT TO OUR STANDARD TERMS AND CONDITIONS, A COPY OF WHICH IS SENT TO OUR CUSTOMERS AND IS ALSO AVAILABLE ON REQUEST.
Please read all labels carefully before using product.
This SDS is prepared in accord with the SWA document “Preparation of Safety Data Sheets for Hazardous Chemicals - Code of Practice” (Feb 2016)