Benvenuto nel nostro negozio

Spedizione gratuita per ordini superiori a $ 300
Bordo  |  SKU: 4234-1.1/4B

1-1/4" x 12 UNF Bottoming Chrome Tap

$170.17
Imposte incluse Spedizione calcolata al momento del checkout.

Informazioni sulla cura

Usare sempre cautela e buon senso quando si lavora con gli strumenti.

Consegna e spedizione

Gli ordini effettuati con Sharp Edge Australia verranno consegnati entro 1-7 giorni lavorativi nel 98% dell'Australia utilizzando Australia Post

UNF | UNIFIED NATIONAL FINE BOTTOMING

About this item:
  • 1-1/4" x 12 UNF Bottoming Chrome Tap
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Fine thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNF is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • When used on external threads this series has greater tensile stress area than coarse threads of the same size.
  • Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt.
  • Fine threads are also used where the length of engagement is limited 1-1/4 or where wall thickness demands a fine pitch.
  • Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
  • Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Part Number: 4234-1.1/4B
Brand: Bordo
Group Code: CTAP
Barcode: 9326518044499
Pack Qty: 1
Diameter (inch): 1-1/4
Drill Diameter (mm): 29.5
Lead: Bottoming
Overall Length (mm): 137
Pitch (tpi): 12
Thread Form: UNF

Pagamento e sicurezza

Modalità di pagamento

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

I tuoi dati di pagamento vengono elaborati in modo sicuro. Non memorizziamo i dettagli della carta di credito né abbiamo accesso ai dati della tua carta di credito.

Bordo

1-1/4" x 12 UNF Bottoming Chrome Tap

$170.17

UNF | UNIFIED NATIONAL FINE BOTTOMING

About this item:
  • 1-1/4" x 12 UNF Bottoming Chrome Tap
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Fine thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNF is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • When used on external threads this series has greater tensile stress area than coarse threads of the same size.
  • Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt.
  • Fine threads are also used where the length of engagement is limited 1-1/4 or where wall thickness demands a fine pitch.
  • Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
  • Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Part Number: 4234-1.1/4B
Brand: Bordo
Group Code: CTAP
Barcode: 9326518044499
Pack Qty: 1
Diameter (inch): 1-1/4
Drill Diameter (mm): 29.5
Lead: Bottoming
Overall Length (mm): 137
Pitch (tpi): 12
Thread Form: UNF
Visualizza prodotto
Torna all’inizio