Καλώς ήρθατε στο κατάστημά μας

Δωρεάν αποστολή για παραγγελίες άνω των 300$

Christmas Orders

Please note: Our suppliers are closed over the holidays. All orders placed after the 16th December will be shipped on the 17th January 2025.
Bordo  |  SKU: 4232-9/16I

9/16" x 12 UNC Intermediate Chrome Tap

$34.41
Συμπεριλαμβανομένου του φόρου Η αποστολή υπολογίζεται στο ταμείο.

Πληροφορίες φροντίδας

Να χρησιμοποιείτε πάντα προσοχή και κοινή λογική όταν εργάζεστε με εργαλεία.

Παράδοση και αποστολή

Οι παραγγελίες που γίνονται με την Sharp Edge Australia θα παραδοθούν εντός 1 έως 7 εργάσιμων ημερών στο 98% της Αυστραλίας χρησιμοποιώντας Australia Post

UNC | UNIFIED NATIONAL COARSE INTERMEDIATE

About this item:
  • 9/16" x 12 UNC Intermediate Chrome Tap
  • Chrome Alloy UNC Intermediate Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Coarse thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • This thread series is commonly used in the mass production of bolts, screws and nuts.
  • It is used for threading into lower tensile strength materials (bronze, brass, aluminium and plastics) to obtain the best resistance to stripping of the internal thread.
  • It is also used on quick assembly or disassembly or if corrosion or slight damage is possible.
  • Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Part Number: 4232-9/16I
Brand: Bordo
Group Code: CTAP
Barcode: 9326518043522
Pack Qty: 1
Diameter (inch): 9/16
Drill Diameter (mm): 12.2
Lead: Intermediate
Overall Length (mm): 95
Pitch (tpi): 12
Thread Form: UNC

Πληρωμή & Ασφάλεια

Μέθοδοι πληρωμής

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Η επεξεργασία των στοιχείων πληρωμής σας γίνεται με ασφάλεια. Δεν αποθηκεύουμε τα στοιχεία της πιστωτικής σας κάρτας ούτε έχουμε πρόσβαση στα στοιχεία της πιστωτικής σας κάρτας.

Bordo

9/16" x 12 UNC Intermediate Chrome Tap

$34.41

UNC | UNIFIED NATIONAL COARSE INTERMEDIATE

About this item:
  • 9/16" x 12 UNC Intermediate Chrome Tap
  • Chrome Alloy UNC Intermediate Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Coarse thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • This thread series is commonly used in the mass production of bolts, screws and nuts.
  • It is used for threading into lower tensile strength materials (bronze, brass, aluminium and plastics) to obtain the best resistance to stripping of the internal thread.
  • It is also used on quick assembly or disassembly or if corrosion or slight damage is possible.
  • Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Part Number: 4232-9/16I
Brand: Bordo
Group Code: CTAP
Barcode: 9326518043522
Pack Qty: 1
Diameter (inch): 9/16
Drill Diameter (mm): 12.2
Lead: Intermediate
Overall Length (mm): 95
Pitch (tpi): 12
Thread Form: UNC

Δείτε το προϊόν
Επιστροφή στην κορυφή