Καλώς ήρθατε στο κατάστημά μας

Δωρεάν αποστολή για παραγγελίες άνω των 300$

Bordo  |  SKU: 4232-1.1/4I

1-1/4" x 7 UNC Intermediate Chrome Tap

$170.17
Συμπεριλαμβανομένου του φόρου Η αποστολή υπολογίζεται στο ταμείο.


 Περισσότερες επιλογές πληρωμής

Διατίθεται παραλαβή από Head Office

Έτοιμο συνήθως σε 2-4 ημέρες

Πληροφορίες φροντίδας

Να χρησιμοποιείτε πάντα προσοχή και κοινή λογική όταν εργάζεστε με εργαλεία.

Παράδοση και αποστολή

Οι παραγγελίες που γίνονται με την Sharp Edge Australia θα παραδοθούν εντός 1 έως 7 εργάσιμων ημερών στο 98% της Αυστραλίας χρησιμοποιώντας Australia Post

UNC | UNIFIED NATIONAL COARSE INTERMEDIATE

About this item:
  • 1.1/4" x 7 UNC Intermediate Chrome Tap
  • Chrome Alloy UNC Intermediate Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Coarse thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • This thread series is commonly used in the mass production of bolts, screws and nuts.
  • It is used for threading into lower tensile strength materials (bronze, brass, aluminium and plastics) to obtain the best resistance to stripping of the internal thread.
  • It is also used on quick assembly or disassembly or if corrosion or slight damage is possible.
  • Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Part Number: 4232-1.1/4I
Brand: Bordo
Group Code: CTAP
Barcode: 9326518043584
Pack Qty: 1
Diameter (inch): 1-1/4
Drill Diameter (mm): 28
Lead: Intermediate
Overall Length (mm): 151
Pitch (tpi): 7
Thread Form: UNC

Πληρωμή & Ασφάλεια

Μέθοδοι πληρωμής

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Η επεξεργασία των στοιχείων πληρωμής σας γίνεται με ασφάλεια. Δεν αποθηκεύουμε τα στοιχεία της πιστωτικής σας κάρτας ούτε έχουμε πρόσβαση στα στοιχεία της πιστωτικής σας κάρτας.

Bordo

1-1/4" x 7 UNC Intermediate Chrome Tap

$170.17

UNC | UNIFIED NATIONAL COARSE INTERMEDIATE

About this item:
  • 1.1/4" x 7 UNC Intermediate Chrome Tap
  • Chrome Alloy UNC Intermediate Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Coarse thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNC is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • This thread series is commonly used in the mass production of bolts, screws and nuts.
  • It is used for threading into lower tensile strength materials (bronze, brass, aluminium and plastics) to obtain the best resistance to stripping of the internal thread.
  • It is also used on quick assembly or disassembly or if corrosion or slight damage is possible.
  • Intermediate Taps have a lead of four threads and are used in most general purpose applications to cut a thread true to a pre-drilled pilot hole.
Part Number: 4232-1.1/4I
Brand: Bordo
Group Code: CTAP
Barcode: 9326518043584
Pack Qty: 1
Diameter (inch): 1-1/4
Drill Diameter (mm): 28
Lead: Intermediate
Overall Length (mm): 151
Pitch (tpi): 7
Thread Form: UNC

Δείτε το προϊόν