Καλώς ήρθατε στο κατάστημά μας

Δωρεάν αποστολή για παραγγελίες άνω των 300$

Christmas Orders

Please note: Our suppliers are closed over the holidays. All orders placed after the 16th December will be shipped on the 17th January 2025.
Bordo  |  SKU: 4234-10GB

10G x 32 UNF Bottoming Chrome Tap

$13.56
Συμπεριλαμβανομένου του φόρου Η αποστολή υπολογίζεται στο ταμείο.

Πληροφορίες φροντίδας

Να χρησιμοποιείτε πάντα προσοχή και κοινή λογική όταν εργάζεστε με εργαλεία.

Παράδοση και αποστολή

Οι παραγγελίες που γίνονται με την Sharp Edge Australia θα παραδοθούν εντός 1 έως 7 εργάσιμων ημερών στο 98% της Αυστραλίας χρησιμοποιώντας Australia Post

UNF | UNIFIED NATIONAL FINE BOTTOMING

About this item:
  • 8G x 36 Chrome Alloy UNF Bottoming Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Fine thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNF is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • When used on external threads this series has greater tensile stress area than coarse threads of the same size.
  • Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt.
  • Fine threads are also used where the length of engagement is limited 1-1/4 or where wall thickness demands a fine pitch.
  • Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
  • Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Part Number: 4234-10GB
Brand: Bordo
Group Code: CTAP
Barcode: 9326518044345
Pack Qty: 1
Diameter (inch): 10G
Drill Diameter (mm): 4.1
Lead: Bottoming
Overall Length (mm): 58
Pitch (tpi): 32
Thread Form: UNF

Πληρωμή & Ασφάλεια

Μέθοδοι πληρωμής

  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Union Pay
  • Visa

Η επεξεργασία των στοιχείων πληρωμής σας γίνεται με ασφάλεια. Δεν αποθηκεύουμε τα στοιχεία της πιστωτικής σας κάρτας ούτε έχουμε πρόσβαση στα στοιχεία της πιστωτικής σας κάρτας.

Bordo

10G x 32 UNF Bottoming Chrome Tap

$13.56

UNF | UNIFIED NATIONAL FINE BOTTOMING

About this item:
  • 8G x 36 Chrome Alloy UNF Bottoming Hand Tap.
  • Used as thread chasers to clean an existing thread.
  • They can also be used to create a new female thread in non-ferrous metals and plastics.
  • Chrome alloy taps are not suitable for creating precision, safety or critical threads.
  • Unified National Fine thread form was introduced in 1948 as an attempt to standardise thread forms in the USA, Canada and the UK.
  • The thread profile of UNF is the same as for metric threads and is described in the JIS B0206 standard.
  • The thread is described by its major diameter and the number of threads per inch of length (TPI).
  • When used on external threads this series has greater tensile stress area than coarse threads of the same size.
  • Fine series threads will resist stripping out better than coarse threads in areas where the external and mating internal threads are subjected to loads equal to or greater than the capacity of the screw or bolt.
  • Fine threads are also used where the length of engagement is limited 1-1/4 or where wall thickness demands a fine pitch.
  • Bottoming Taps have a lead of two threads and are used to ensure minimum thread run-out when tapping to the bottom of a blind hole.
  • Bottoming Taps are typically preceded by the use of a Taper or Intermediate Tap.
Part Number: 4234-10GB
Brand: Bordo
Group Code: CTAP
Barcode: 9326518044345
Pack Qty: 1
Diameter (inch): 10G
Drill Diameter (mm): 4.1
Lead: Bottoming
Overall Length (mm): 58
Pitch (tpi): 32
Thread Form: UNF

Δείτε το προϊόν
Επιστροφή στην κορυφή